Worldwide free Shipping 100% Fast free

home Uncategorized 15 Most Wanted Wood Working Power Tools Reviews 2018 – Woodworking Tools

15 Most Wanted Wood Working Power Tools Reviews 2018 – Woodworking Tools

15 Most Wanted Wood Working Power Tools Reviews 2018 – Woodworking Tools

 

1. festool 574447 XL DF 700 Domino Joiner Set

Joiner set
$1,500.00

 

Unique, patented cutting action that rotates and oscillates to create perfect, clean, and repeatable mortises every time
Mortise width adjustment with the turn of a dial allows for easier alignment when joining panels . Indexing pins for quick alignment against the edge of the work piece for accurate placement
Tenons up to approximately 5-1/2-Inch in length for large scale projects , Includes optional trim and cross stops for narrow stock and edge joining . Revolutionizing Joinery and Rethinking Woodworking , Build solid and durable mortise and tenon joints in a fraction of the time it takes with traditional methods or stationary equipment. The Domino XL lets you bring the tool to the work, greatly reducing setup time while simply and effectively

Pivoting fence
Fence creates angled mortises from 0-90 degrees with positive stops at 22.5 degrees, 45 degrees, 67.5 degrees.

Depth control
Quick, precise adjustment for five different mortising depths, relative to the size of the tenon required for the application. Patented routing principle
The spiral cutter rotates and oscillates to create perfect mortises.

Mortise width adjustment
Adjusting the width of the mortise allows for easier alignment when joining panels.

View larger

Why the Domino XL?
Faster, More Repeatable Work
The Domino streamlines an otherwise tedious process — allowing you to do more work in less time.

Precision and Accuracy
Remove the guesswork from your woodworking. The German-engineered Domino XL takes sure that each mortise cut is the right one.

Why Choose Festool?

The pairings and possibilities are endless. But here’s just one example of starting smart—and gaining even greater levels of efficiency as you go. With each new piece built on to your Festool system, you boost the speed and productivity of your work. Better still, you increase the precision brought to your projects. Because that’s what sets you apart as an uncompromising craftsman. Beyond simply working better together, our products are engineered, manufactured and calibrated to operate in sync, resulting in the performance you demand and deserve.

Dust extraction
Portable for easy use and storage
Unmatched precision and performance

2.Festool 498899 Assorted Domino Beech Tenons and Cutters in T-Loc Systainer

 

Festool Beech Tenon’s are made from all-natural, solid hardwood for strength and stability. The Beech Tenon serves as a true floating Tenon in mortise and Tenon applications such as furniture, cabinetmaking, casing and frame work. The flat, elongated design will not rotate, ensuring perfect alignment for both edge and face gluing. Suitable for both plywood and solid wood applications, the dense beech Tenon will not expand or telegraph through material, leaving you with clean, flat, and consistent surfaces. The Domino Tenon is embossed with glue pockets, and is approximately 2mm shorter than nominal length, allowing space in the mortise for glue. Tenon’s come in removable plastic bins. Assortment includes 5 Cutters, Domino Assortment Systainer, and 1060 Tenon’s. Tenon assortment: 4 x 20mm (450), 5 x 30mm (225); 6 x 40mm (150); 8 x 40mm (100); 8 x 50mm (75); 10 x 50mm (60). Cutter assortment: D4mm (1), D5mm (1); D6mm (1); D8mm (1); D10mm (1).

Systainer to sort and keep Domino tenons together and for easy access to them when working
Includes three plastic, removable storage bins with dividers
Includes new T-Loc Systainer

3. Festool 574692 Router OF 1400 EQ Imperial

 

600$

Ergonomic handles: Festool routers are designed for increased control and reduced fatigue. Integrated switches allow use with just one hand
Dust extraction: Integrated dust extraction ports capture dust and debris at the point of creation, increasing visibility, prolonging cutter life, and saving valuable cleanup time
Swiveling chip deflector: Can be used with edge forming bits, maximizing chip and dust extraction even around curves and corners. Attaches and releases quickly with tool-free spring clip system
System integration: Designed for use with the FS Guide Rail system, MFS multi-routing templates, and a wide range of other accessory options Precision depth adjustment: Micro-adjustability dial allows routing with tremendous precision

Our most versatile router packs 1400 watts into less than 10 lbs. It’s got enough power for most routing tasks, yet it’s small enough to allow precise control.

4. DEWALT DWP611PK 1.25 HP Max Torque Variable Speed Compact Route 

 

$189.98

Available from these sellers.
Durable 1.25hp motor delivers the power to meet the toughest applications
Variable speed control feature enables bit speed to be optimized for changing applications. No Load Speed range 16,000-27,000rpm
Soft-starting motor features full-time electronic feedback that maintains motor speed through the cut
Dual LED’s and clear sub-base ensure maximum visibility in operation
Adjustment ring enables controlled bit depth changes to within 1/64-inch (fixed base only)
Allows up to 1.5″ of depth travel with standard base & 2″ with plunge base.Adjustment ring enables controlled bit depth changes to within 1/64″

1.25 HP Max Torque Variable Speed Compact Router Combo Kit with LED’s
The DWP611PK 1.25 HP Max Torque Variable Speed Compact Router Combo Kit with LED’s has a 1.25 HP motor to deliver power for the toughest applications, and variable speed control for optimal bit speed in each application. Features precise depth adjustments and fast, easy motor pack removal for bit and base changes. LED light and clear plastic fixed base provide superior bit visibility.

Amps: 7.0 Amps
Collet Diameter: 1/4 in
Horsepower: 1.25 HP
Plunge Stroke: 2 in
Router Base: Combo Kit
Spindle Lock: 12 Position
Base Dimension: 4″ (standard),4 3/8″ x 5 3/4″ (plunge) in
Depth Stop: 5
No Load Speed: 16,000-27,000 rpm
Power Tool Type: Corded
Router Type: Compact Router
Tool Weight: 4.6 (fixed) , 6.2 (plunge) lbs
Features
– Durable 1.25HP motor delivers the power to meet the toughest applications.

– Variable speed control feature enables bit speed to be optimized for changing applications.

– Soft-starting motor features full-time electronic feedback that maintains motor speed through the cut.

– Dual LED’s and clear sub-base ensure maximum visibility in operation.

– Adjustment ring enables controlled bit depth changes to within 1/64″ (fixed base only).

– Plunge base incorporates fine-tune adjustment rod for precise depth setting.

– Large, low-pressure spindle lock button allows for comfortable, single wrench bit changes.

– Multiple shaft-lock detents enable quick and simple bit changes.

– Depth ring and clamping mechanism combine to ensure motor remains locked in position (fixed base only).

– Spring-loaded release tabs allow for quick base removal (fixed base only).

– Motor can be transitioned quickly and easily between fixed and plunge bases.

– Overmolded rubber handles provide a comfortable and secure grip (plunge base only).

– Allows up to 1.5″ of depth travel with standard base & 2″ with plunge base.

– Aluminum motor housing and base construction provides long term durability.

– Extended sub-base provides greater work surface contact for improved user control (fixed base).

– Large plunge base platform provides added stability for heavier applications and sub-base accepts universal template guides.

– Extended 8-slot 1/4″ collet maximizes surface contact with router bit shank for a tighter grip.

 

5. Shop Fox D4088 Lathe Attachment for Drill Press
by Woodstock

 

$44.57

 

 

Includes a base plate with live center, 12-Inch tool rest, mounting bolts, mini screw center and spur center
Fits all drill presses with a through hole in the table
Tool rest length: 12″
Maximum workpiece length: 24″
Maximum workpiece diameter: 6″

Woodstock D4088 Lathe Attachment for Drill Press
for Drill Press
Perform vertical spindle turning on your multi-speed drill press with this Lathe Attachment. Easy setup means quick changeover from drilling mode to turning mode. A 12 inch tool rest allows a maximum work piece length of 24 inch when the work piece is reversed.

Shipping weight: 3.5 lbs.
Tool rest length: 12″
Fits drill press tables with T-nut slots or with slotted through holes.

View larger
Base Plate with Live Center
The D4088 includes a base plate with live center for smooth turning operations. The 12 inch tool rest provides plenty of leverage for your tuning needs.

Easy-to-Install
ncluded with this lathe attachment are mounting bolts for easy installation on a drill press table. Also included is a mini screw center and spur center. This lathe attachment will fit all drill presses with a through hole in the table.

Specifications
Tool rest length: 12″
Maximum workpiece length: 24″
Maximum workpiece diameter: 6″
Shank diameter of screw and spur center: 3/8″
Constructed of steel
Shipping weight: 3.5 lbs.

View larger
Turn a Range of Stock
The Model D4088 Drill Press Lathe Attachment allows wooden workpieces to be turned on a drill press in the same manner as a wood lathe, only vertically rather than horizontally. Items like small pickets, legs, spindles, candle holders, salt and pepper shakers, handles, dowels, and pins can be
be made.

Multi Speed Drill Press
The lathe attachment is designed for use with drill presses that offer multiple speeds. This allows for a greater variety of stock to be turned and allows for safer operation when roughing, shaping and finishing.

Perform vertical spindle turning on your multi-speed drill press with this Lathe Attachment. Easy setup means quick change over from drill press mode to lathe mode. A 12-Inch tool rest allows a maximum work piece length of 24-Inch when the work piece is reversed.

From the Manufacturer
Perform vertical spindle turning on your multi-speed drill press with this Lathe Attachment. Easy setup means quick change over from drill press mode to lathe mode. A 12-Inch tool rest allows a maximum work piece length of 24-Inch when the work piece is reversed.

6. WEN 6033 15-Amp Variable Speed Plunge Woodworking Router Kit with Carrying Case & Edge Guide

 

$80.54

 

Save an extra $2.58 when you apply this coupon. Details
Powerful 15-amp variable speed soft start motor provides anywhere from 8,000 to 23,000 RPM
Plunging base locks in downward position for functionality as both a plunge and a fixed router
Accepts both 1/4 and 1/2-inch router bits with a plunge depth of up to 2-3/8 inches
7-stop turret combined with both macro and micro-adjustment dials maximize precision
Includes a hard-shelled carrying case, a multi-function straight-edge fence, a template guide, a circle-cutting centering pin, a fence scale, a 1-1/2-inch dust collection duct, and a two-year warranty

Save an extra $2.58 when you apply this coupon. Details
Powerful 15-amp variable speed soft start motor provides anywhere from 8,000 to 23,000 RPM
Plunging base locks in downward position for functionality as both a plunge and a fixed router
Accepts both 1/4 and 1/2-inch router bits with a plunge depth of up to 2-3/8 inches
7-stop turret combined with both macro and micro-adjustment dials maximize precision
Includes a hard-shelled carrying case, a multi-function straight-edge fence, a template guide, a circle-cutting centering pin, a fence scale, a 1-1/2-inch dust collection duct, and a two-year warranty

Take the Plunge

Remember when you had versatility and power all in the palm of your hand? Make intricate patterns in both the exterior and interior of your workpieces with the WEN 15-Amp Variable Speed Plunge Router. This versatile machine features a variable speed 15-amp motor, providing users anywhere from 8,000 to 23,000 rotations per minute. The 1/2-inch collet includes an additional 1/4-inch adapter, allowing for compatibility with a wide variety of bits. Our soft startup design prevents damage to your workpiece and elongates the tool’s lifespan. The spring-loaded base features a lock-down knob to turn your plunge router into a fixed router. The intricate depth stop system features a 7-stop turret, a depth adjustment dial that advances the depth stop 5/16 of an inch per quarter turn, and a fine-tune adjustment dial that advances it 1/128 of an inch per quarter turn. The included guide fence lets users rout perfectly straight lines, helping to create dadoes and grooves along the workpiece.

Remember when you had versatility and power all in the palm of your hand? Do you fancy chamfers and v-grooves or are you partial towards rabbets and dados? We won’t judge. That’ll just be between you and your router. Make intricate patterns in both the exterior and interior of your workpieces with the WEN 15-Amp Variable Speed Plunge Router. This versatile machine features a variable speed 15-amp motor, providing users anywhere from 8,000 to 23,000 rotations per minute. The 1/2-inch collet includes an additional 1/4-inch adapter, allowing for compatibility with a wide variety of bits. Our soft startup design prevents damage to your workpiece and elongates the tool’s lifespan. The spring-loaded base features a lock-down knob to turn your plunge router into a fixed router. The intricate depth stop system features a 7-stop turret, a depth adjustment dial that advances the depth stop 5/16 of an inch per quarter turn, and a fine-tune adjustment dial that advances it 1/128 of an inch per quarter turn. The included guide fence lets users rout perfectly straight lines, helping to create dadoes and grooves along the workpiece. This kit comes packed with accessories, including a hard-shelled blow mold carrying case, a 1-1/2 inch dust collection duct, a bit-changing wrench, a straight-edge guide fence, a fence scale, a centering pin for cutting circles, a profile guide for routing edges of curvy workpieces, and a template guide for creating more complex shapes. And, because its a WEN product, your woodworking router comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line. Remember when you stepped your carpentry up a notch? Remember WEN.

7. Festool 574432 Domino Joiner DF 500 Q Set

$1,040.00

 

Unique, patented cutting action that rotates and oscillates to create perfect, clean, and repeatable mortises every time.
Mortise width adjustment with the turn of a dial allows for easier alignment when joining panels.
Pivoting Fence allows you to create angled mortises from 0-90° with positive stops at 22.5°, 45°, 67.5°.
Indexing pins for quick alignment against the edge of the workpiece for

accurate placement. Hose port diameter: 1.06 inch
Dust extractable design provides clean mortise holes for better glue adhesion and longer cutt

Revolutionizing Joinery and Rethinking Woodworking
Joining has always been a slow, difficult process. The Festool Domino cuts the fat from joinery to let craftsmen make stronger, faster and easier joints. The Domino joiner — with its revolutionary cutting method — creates mortises that accept Beech and Sipo tenons (called Dominos). The process is fast, easy and accurate.

The unique tool allows for highly repeatable work — significantly improving your efficiency a

and allowing you to do more work in less time.

Key Features

Depth Control
Quick, precise adjustment for five different mortising depths, relative to the size of the tenon required for the application.

Pivoting Fence for Angled Mortises
Fence creates angled mortises from 0-90 degrees with positive stops at 22.5 degrees, 45 degrees, 67.5 degrees.

Mortise Width Adjustment
Adjusting the width of the mortise allows for easier alignment when joining panels.

Patented Routing Principle
The spiral cutter rotates and oscillates to create perfect mortises.

Precision and Accuracy
Remove the guesswork from your woodworking. The German-engineered Domino takes sure that each mortise cut is the right one.

Versatile for any Project
The Domino is a complex tool that can be easily used for a wide variety of projects. Adjust your depths and angles for each project’s needs.

View larger
Why Dust Matters
The benefits of dust extraction

Why choose Festool?

The pairings and possibilities are endless. But here’s just one example of starting smart—and gaining even greater levels of efficiency as you go. With each new piece built on to your Festool system, you boost the speed and productivity of your work. Better still, you increase the precision brought to your projects. Because that’s what sets you apart as an uncompromising craftsman. Beyond simply working better together, our products are engineered, manufactured and calibrated to operate in sync, resulting in the performance you demand and deserve.

Dust extraction

Portable for easy use and storage
Unmatched precision and performance

WARNING: California’s Proposition 65

Combination set includes: Domino DF 500-Plus Joiner, DOMINO cutter D 5mm, Support Bracket, Operating Tool, Trim Stop, Cross Stop, Plug-It Power Cord, and T-LOC Systainer #2 storage container.

You can make flawless mortises every single time, thanks to Festool’s new Domino joining system! Joining no longer has to be a slow, difficult process. The Domino Joiner, with its revolutionary cutting method, utilizes a patented mortising technique, simple indexing features, and adjustable mortise sizing to make flawless mortises. Powerful 420 watt motor drives the cutter spindle at 23,400 RPM.

Precise positioning and accurate mortising with the viewing window. Use 1 of 3 mortise width adjustments for perfectly fitting joints and fast assembly; easy to adjust while the jointer is operating. Cut long mortises in an instant thanks to the simultaneous turning and oscillating movement without kickback. 11/16″ dust port extracts up to 95% of chips generated when used in conjunction with any one of Festool’s vacuum systems. Retractable stop pins for quick and precise positioning of the initial domino tenon on both work pieces. Five catch positions at 0, 22.5, 45, 67.5, and 90 degrees, as well as infinitely variable mortising angles from 0 to 90 degrees.

https://www.homehandpowertools.com/wp-admin/post.php?post=5315&action=edit

Simple, precise mortising fence height adjustment (with scale) offers accurate stops for locating mortising opening in the center of material thicknesses: 16, 20, 22, 25, 28, and 40mm. Quick, precise adjustment for 5 different mortising depths. Robust inner mechanism for consistently accurate routing results. Works on everything from face frames and work pieces as small as 1″ x 5/8″, to large projects and heavy furniture. Uses pre-fabricated, solid beech domino tenons for superior strength.

Joining has always been a slow, difficult process. Never again, thanks to the Festool Domino joining system. The system consists of the Domino joiner and pre-fabricated, Beech and Sipo Domino tenons. The Domino joiner, with its revolutionary cutting method, simple indexing features and adjustable mortise sizing, makes flawless mortises every single time. The Domino tenon is equally as impressive – it is 100% rotation-proof and far stronger than either biscuits or dowels. It also has a large gluing surface area for extra strength. The unique, patented cutting mechanism consists of a spiral cutter with carbide tip that oscillates as it rotates to create perfect mortises time after time. This action creates a clean entry for a perfectly flush surface while preventing heat build up in the tooling for long cutter life. The Domino joiner is a simple tool to use with angle, depth and height adjustment scales with positive stops for repeated work and accurate indexing. The included stop pins allow for consistent indexing against the workpiece edge which is critical for perfect alignment when joining panels. Create precise, solid joints for your largest or smallest projects. The Domino is portable and ergonomic and lets you take the tool to the work for precise joint placement. The adjustable fence for mitered and beveled joints ranges from 0 to 90º with positive stops at 22.5, 45, 67.5, and 90º. Straightforward adjustments for mortise width and depth, and material height. An available range of tenon sizes and types for maximum joint stability across many different applications. The Domino system is above all economical and efficient. The fast, easy alignment and repeatability of accurate mortises dramatically reduces set-up time and enhances your quality of work. The set version includes additional Festool accessories Trim Stop for registering on narrow pieces and Cross Stop for repeat mortise indexing. Made in Germany.

9. DEWALT DW682K 6.5 Amp Plate Joiner

 

6.5 Amp, 10,000 rpm motor provides power for working in the hardest woods
Dual rack and pinion fence ensure blade and fence are always parallel for accurate joints every time
Integral one-piece fence is adjustable and tilts 0-90 degrees
Flush cuts can be made at 0 degrees without removing fence
45 degree locating notch in fence allows indexing off the outside surface of a mitered joint; non-marring, heavy-duty aluminum shoe allows joiner to be clamped for stationary work

wood-working-power-tools
DEWALT DW682K 6.5 Amp Plate Joiner
The DW682K Plate Joiner Kit has a powerful motor for working with hard woods. Features a dual rack and pinion fence ensuring blade and fence parallelism for accurate joints every time. Integral one-piece fence is adjustable and tilts 0-90°.

6.5 amp, 10,000 rpm motor provides power for working in the hardest woods
Integral one-piece fence is adjustable and tilts 0-90°
45-degree locating notch in fence allows indexing off the outside surface of a mitered joint
Retractable, anti-slip pins help hold work in place
Dual rack and pinion fence ensure blade and fence are always parallel for accurate joints every time
Flush cuts can be made at 0° without removing fence
Non-marring, heavy-duty aluminum shoe allows joiner to be clamped for stationary work
Preset depth stops for all common bi

Dual rack and pinion fence ensure blade and fence are always parallel, integral one-piece fence is adjustable and tilts 0-90 degrees, flush cuts can be made at 0 degrees without removing fence, 45 degree locating notch in fence allows indexing off the outside surface of a mitered joint, non-marring, heavy-duty aluminum shoe, retractable, anti-slip pins, preset depth stops for all common biscuit sizes. Specs: 7/8″ arbor, no load speed 10,000RPM, depth of cut (mm) 20mm, biscuits accepted 0, 10, 20, weighs 6.6lbs. Includes: carbide blade, dust bag, vacuum adapter, torx key, wrench, kit box.

The DEWALT DW682K Plate Joiner Kit allows you to cut slots for holding biscuits with precision. This kit includes an easy-to-adjust fence, a heavy-duty nonmarring shoe, and preset stops for all common biscuit sizes, so you can craft solid joints quickly and accurately.

Plate Joiner Kit
At a Glance:
Quick and accurate cuts for use in joinery applications

Powerful, 6-1/2 amp, 10,000 rpm motor to cut through the hardest woods

wood-working-power-tools

Adjustable, integrated fence for precise positioning

Preset depth stops for all common biscuit sizes

Three-year limited warranty, one-year free service, 90-day money-back guarantee

The 6-1/2 amp, 10,000 rpm motor lets you make quick, precise cuts in joinery applications. View larger

The plane joiner has an adjustable integrated fence for precise positioning. View larger.
Integrated, Adjustable Fence for Accuracy
Accuracy is critical when creating joints and The DEWALT Plate Joiner Kit delivers. Its dual rack-and-pinion fence is designed to ensure the blade and fence are always parallel–the toughest part of creating a perfect joint. This one-piece fence is integrated into the joiner’s overall design for convenience, plus it’s adjustable, and can be tilted at angles ranging from 0 to 90 degrees.
The plate joiner’s configuration allows you to make flush cuts without removing the fence. A 45-degree locating notch in the fence allows for easy indexing of an outside registration.

Dependable Motor for Quick, Precise Cuts
The DW682K’s 6-1/2 amp, 10,000 rpm motor provides plenty of power for making cuts at depth of up to 20 millimeters–even in the hardest woods. The power behind the cut is an integral part of what makes this tool safer, as it prevents unexpected movements with your workpiece.

Convenient Design Details Including Preset Stops
Equipped with a non-marring, heavy-duty aluminum shoe, the DW682K can be clamped down for stable, stationary work. And whether you’re using the joiner clamped down or as a free-moving unit, the retractable, antislip pins help hold your workpiece in place for the perfect cut. And it weighs just 6.6 pounds for easy handling.

For easy setup, the DW682K features preset depth stops for all common biscuit sizes of 0, 10, and 20.

wood-working-power-tools

The DW682K Plate Joiner Kit comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What’s in the Box

10. DW682K Plate Joiner, carbide blade, dust bag, vacuum adapter, Torx key, wrench, and kit box.

Price: $74.55

 

Includes a 1/2-inch keyed chuck and onboard key storage
Operates at 5 different speeds: 740, 1100, 1530, 2100, 3140 RPM
Spindle travels up to 2 inches with easy to read, locking linear depth stops for accurate and repeatable drilling operations
Durable 1/3 HP induction motor develops ample torque and power

1/2″ worktable is height adjustable and bevels up to 45 degrees left & right
Swing: 8 inch. Motor: 120V, 60Hz. Horsepower: 1/3 HP.
› See more product details

Remember when power tools were actually powerful? WEN’s 8-inch swing, 5-speed drill press is small but powerful enough to drill through metal, wood, plastics, and other materials. Max drill capacity is 1/2” in 1” thick cast iron. When you need accurate, repeatable holes, this tool will do the job more conveniently and precisely than a hand held drill. The perfect size for the shop and portable enough to take to the job. Constructed with a rigid frame consisting of cast iron: head, table, and base ensuring accurate holes. Its powerful induction motor features ball bearings for an extended life and it all comes together with smooth and balanced performance even at high speeds. The ½” chuck with JT33 spindle taper gives you versatility with a variety of bits. Worktable bevels 45° left and right for those tricky operations for the perfect right angles consistently. The base contains predrilled holes for mounting onto a bench or work stand. The slotted table allows for mounting clamps and vises for effective workholding. Since 1951, WEN has proudly produced innovative powered tools focused on value delivering meaningful features that will help you complete and enjoy the work as much as the project. Remember when you could drill holes in any material with ease? Remember WEN.

wood-working-power-tools

11 . WEN 3920 16-Inch Two-Direction Variable Speed Scroll Saw with Flexible LED Light

 

 

 

Unique design accepts blades in two directions (standard and 90 degrees) to allow for infinite ripping capacity
Variable speed goes from 400 to 1600 strokes per minute
Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts
Cuts wood up to 2 inches thick with a 16-inch throat depth in the standard position
Features a cast iron base, air pump, flex light, dust port, foot lock clamp, onboard storage, and three blades
› See more product details

$83.65 Details

WEN 16-Inch Variable Speed Scroll Saw
Remember when you could make artful and intricate cuts in your work pieces? The WEN 16-inch Variable Speed Scroll Saw gives you full control over your designs and creativity. Our unique blade holder accepts both pinned and pinless blades while also allowing users to change the direction of their cut. For pinned blades, simply pop the pin out of the front holder and turn the blade 90 degrees. Now, your cuts are no longer confined by the 16-inch throat of the scroll saw. On top of that, our removable pinless blade holder tightly grips blades to prevent them from coming loose during operation.

The variable speed ranges anywhere from 550 to 1600 strokes per minute and can be easily adjusted by the speed knob located on the front of the machine. The spacious 16-by-11-inch table bevels up to 45 degrees to the left. Easily cut wood up to 1.9 inches thick with the 9/16 inch stroke of the saw’s arm. The tension-release switch is easily accessible right at the top of the machine for quick blade changes. The air pump clears dust from your work area to give you precise cuts with a clear line of vision. This combined with the 1.5-inch dust port work together to keep your station sawdust free. And, because it’s a WEN product, your scroll saw some comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line all to make sure you remember WEN.

Scroll Saw
Cast Iron Base
LED Worm Worklight
1.5-Inch Dust Port
One 5-inch Pinless Blade
Two 5-inch Pinned Blades
Beveling 16-by-11-inch Table
On-Board Blade Storage
Hold-down Foot Clamp
Adjustable Air Pump
Pinless Blade Adapter
Hex Wrenches
On-Board Pinless Adapter Mo

Remember when your scroll saw could cut in two different directions? Take on the most intricate and artful cuts with the WEN 16-Inch Variable Speed Two-Direction Scroll Saw. The 9/16-inch stroke saws through hard woods up to two inches thick. Adjust the speed anywhere from 550 to 1600 strokes per minute with the simple turn of a knob. The cast iron base prevents vibration and walking during operation while the spacious 16-by-11-inch table bevels up to 45 degrees for angled cut. The adjustable air pump clears saw dust from your work area to give you a clear line of vision as you cut. This combined with the 1-1/2-inch dust port keep your work area clean so you can focus on your woodworking. The saw also includes a hold-down foot clamp for securing your project in place along with a flexible work light that bends and adjusts to whatever position your heart desires. This unique blade holder accepts both pinned and pinless blades while also allowing users to change the direction of their cut to accommodate their particular workpiece. For pinned blades, simply pop the pins out of the front holder and turn the blade 90 degrees. Now, your cuts are no longer confined by the 16-inch throat of the scroll saw. On top of that, our removable pinless blade holder design tightly grips blades to prevent them from coming loose during operation. Onboard blade and holder storage creates simple organization solutions between jobs. And because its a WEN product, your scroll saw comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line, all to make sure you remember WEN.

wood-working-power-tools

 

12. . Rikon 10-305 Bandsaw With Fence, 10-Inch

$299.99

 

Solid Steel Design- The 10-305 is a scaled down version of the popular 10-345 and 10-325. Frame is made of steel plate, stronger than plastic frames used by other manufactures
Cast Iron Table-Large 13-3/4-Inch by 12-1/2-Inch sturdy work surface, a feature not typically found on a bandsaw of this size
Rip Fence- A quality rip fence is now included. Easily removed to do free hand work
Motor – 1/3HP motor provides ample power for cutting bowl and pen blanks
Micro Adjustable Guide Post- Raise and lower the guide post  

Product description
Get all of the features of a full size bandsaw in this bench top model. The large cast iron table, edge facing thrust bearings, a powerful 1/3 HP induction motor, and 4-5/8 in cutting capacity are all of the features you come to expect as standard from Rikon. Add the optional stand for the functionality of a floor model. Specs: 1/3 HP, 3.5 amp motor, speed 2780 ft/min, safety paddle switch. Cutting capacities: Height 4-5/8”, Width 9-5/8”. Table is 13-3/4″ x 12-1/2″. Edge facing thrust bearings. 70-1/2″ blade range from 1/8″ to 1/2″.

From the Manufacturer

wood-working-power-tools

The Rikon 10-Inch Bandsaw Model 10-305 offers all of the same quality features found in larger bandsaws. Includes 1/3HP motor, cast iron table and 4-5/8-Inch re-saw capacity. The 10-305 also includes a fence and micro adjustable guide post height. A 2-1/2-Inch dust port keeps your work area

13 . WEN 4208 8 in. 5-Speed Drill Press
by WEN

$74.55

Includes a 1/2-inch keyed chuck and onboard key storage
Operates at 5 different speeds: 740, 1100, 1530, 2100, 3140 RPM
Spindle travels up to 2 inches with easy to read, locking linear depth stops for accurate and repeatable drilling operations
Durable 1/3 HP induction motor develops ample torque and power
6-1/2 x 6-1/2″ worktable is height adjustable and bevels up to 45 degrees left & right
Swing: 8 inch. Motor: 120V, 60Hz. Horsepower: 1/3 HP.

Powerful. Versatile. Compact.
Remember when power tools were actually powerful? WEN’s 8-inch 5-Speed Drill Press is compact enough to limit space on your work bench but powerful enough to drill through metal, wood, plastics, and more. Drill up to a 1/2-inch hole in heavy-duty cast iron. Its powerful induction motor features ball bearing construction for an extended life, providing smooth and balanced performance even at high speeds. The 1/2-inch JT33 chuck gives you versatility with a variety of bits while the worktable bevels up to 45° left and right. Constructed with a rigid frame and a cast iron head, table, and base, ensure accurate holes and convenient drilling operations every time. Remember when you could drill holes in any material with ease? Remember WEN.

Features:
Five-Speed Operation
Locking Depth Stops
1/2-inch Keyed Chuck
On-Board Key Storage
1/3 HP induction Motor
2-inch Spindle Travel
Beveling Worktable
One-Year Warranty

Product description
Remember when power tools were actually powerful? WEN’s 8-inch swing, 5-speed drill press is small but powerful enough to drill through metal, wood, plastics, and other materials. Max drill capacity is 1/2” in 1” thick cast iron. When you need accurate, repeatable holes, this tool will do the job more conveniently and precisely than a hand held drill. The perfect size for the shop and portable enough to take to the job. Constructed with a rigid frame consisting of cast iron: head, table, and base ensuring accurate holes. Its powerful induction motor features ball bearings for an extended life and it all comes together with smooth and balanced performance even at high speeds. The ½” chuck with JT33 spindle taper gives you versatility with a variety of bits. Worktable bevels 45° left and right for those tricky operations for the perfect right angles consistently. The base contains predrilled holes for mounting onto a bench or work stand. The slotted table allows for mounting clamps and vises for effective workholding. Since 1951, WEN has proudly produced innovative powered tools focused on value delivering meaningful features that will help you complete and enjoy the work as much as the project. Remember when you could drill holes in any material with ease? Remember WEN.

wood-working-power-tools

 

14 .WEN 3920 16-Inch Two-Direction Variable Speed Scroll Saw with Flexible LED Light

$83.65

Unique design accepts blades in two directions (standard and 90 degrees) to allow for infinite ripping capacity
Variable speed goes from 400 to 1600 strokes per minute
Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts
Cuts wood up to 2 inches thick with a 16-inch throat depth in the standard position
Features a cast iron base, air pump, flex light, dust port, foot lock clamp, onboard storage, and three blades
› See more product details

ed Scroll Saw
Remember when you could make artful and intricate cuts in your work pieces? The WEN 16-inch Variable Speed Scroll Saw gives you full control over your designs and creativity. Our unique blade holder accepts both pinned and pinless blades while also allowing users to change the direction of their cut. For pinned blades, simply pop the pin out of the front holder and turn the blade 90 degrees. Now, your cuts are no longer confined by the 16-inch throat of the scroll saw. On top of that, our removable pinless blade holder tightly grips blades to prevent them from coming loose during operation.

wood-working-power-tools

The variable speed ranges anywhere from 550 to 1600 strokes per minute and can be easily adjusted by the speed knob located on the front of the machine. The spacious 16-by-11-inch table bevels up to 45 degrees to the left. Easily cut wood up to 1.9 inches thick with the 9/16 inch stroke of the saw’s arm. The tension-release switch is easily accessible right at the top of the machine for quick blade changes. The air pump clears dust from your work area to give you precise cuts with a clear line of vision. This combined with the 1.5-inch dust port work together to keep your station sawdust free. And, because it’s a WEN product, your scroll saw some comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line all to make sure you remember WEN.

Remember when your scroll saw could cut in two different directions? Take on the most intricate and artful cuts with the WEN 16-Inch Variable Speed Two-Direction Scroll Saw. The 9/16-inch stroke saws through hard woods up to two inches thick. Adjust the speed anywhere from 550 to 1600 strokes per minute with the simple turn of a knob. The cast iron base prevents vibration and walking during operation while the spacious 16-by-11-inch table bevels up to 45 degrees for angled cut. The adjustable air pump clears saw dust from your work area to give you a clear line of vision as you cut. This combined with the 1-1/2-inch dust port keep your work area clean so you can focus on your woodworking. The saw also includes a hold-down foot clamp for securing your project in place along with a flexible work light that bends and adjusts to whatever position your heart desires. This unique blade holder accepts both pinned and pinless blades while also allowing users to change the direction of their cut to accommodate their particular workpiece. For pinned blades, simply pop the pins out of the front holder and turn the blade 90 degrees. Now, your cuts are no longer confined by the 16-inch throat of the scroll saw. On top of that, our removable pinless blade holder design tightly grips blades to prevent them from coming loose during operation. Onboard blade and holder storage creates simple organization solutions between jobs. And because its a WEN product, your scroll saw comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line, all to make sure you remember WEN.

wood-working-power-tools

 

Leave a Reply

Your email address will not be published. Required fields are marked *