RS-550s Brushed DC Motor Weight: ~7.7oz (218g) Body Length: 2.24in (57mm) Body Diameter: 1.46in (37.5mm)
Operating Voltage: ~6v – 24v | Optimal Volt Range: 12v – 18v | 18 Volt Nominal (Optimal Power, Speed, and Torque near 18 volts)
Shaft Length ~0.35 inch / ~11/32in or ~9mm | Diameter ~0.125 inch / 1/8in or ~3.175mm | Style: Round | Stall Current: ~85A | Efficiency: ~70% | No Load RPM: ~20000 rpms | RPM Peak Efficiency: ~17000 rpms
Designed as a Power Tool Drill motor and may replace motors in many 3/8in drills and other cordless and outdoor tools. Popular choice for DIY Electronics and Robotics, PowerWheels, and some Gate Openers. Will not work or fit in all models, be sure to check your specific applications requirements before purchasing
PLEASE NOTE: If your replacing a motor please be sure to verify the motor matches your dimensions and shaft length and diameter before purchasing.